Agilent 8481A Power Meter Probe 1μm - 100mw, 10mHz - 18GHz

• Agilent/HP/8481A
• How to buyAgilent 8481A Power Meter Probe 1μm - 100mw, 10mHz - 18GHz？PleaseOnline Quote Requestor 24h service tel：13715327187

Description：

Main Features:
Wide Frequency Range: The frequency range is from 10MHz to 18GHz, which can meet the measurement requirements of various RF application scenarios.
High-Precision Measurement: The power linearity is less than 1%, and the measurement accuracy is ±0.02dB or ±0.5% within the measurement range, and ±0.04dB or ±1% beyond the measurement range, ensuring the accuracy of measurement results.
Wide Dynamic Range: The dynamic range is from - 30dBm to + 20dBm (1μW to 100mW), which can adapt to the measurement of signals with different intensities.
Low Standing Wave Ratio: It has an excellent standing wave ratio (SWR), which can reduce the mismatch uncertainty and improve the measurement stability.
Internal Calibration: The EEPROM technology is used to store the calibration coefficients, which can be traced back to the National Institute of Standards and Technology (NIST) in the United States. No manual calibration is required, simplifying the use process.
Strong Compatibility: It is compatible with the EPM series, EPM-P series, P series power meters, E1416A VXI, and some discontinued 70100A and 43X power meters.
Technical Parameters:
Connection Method: Usually connected to the power meter through a BNC connector, and a precision N-type connector can also be used.
Power Requirements: A 220V and 240Vac power supply is required, with a frequency of 48 - 66Hz and a power requirement of 8W (10VA).
Zero Setting Accuracy: Within the sensitive range, the accuracy of zero setting is ±0.5% of the full scale.
Dimensions and Weight: The dimensions are approximately 88mm (height)×212mm (width)×273mm (length), and the net weight is 2.6 kg.

Quality Assurance：

Most of our products were examined strictly before shippinp and can apply for a calibration report.