Anritsu/ MG9002A/ 光源稳定器

• Anritsu/ MG9002A/ 光源稳定器
• 欲购买或租赁Anritsu/ MG9002A/ 光源稳定器？请在线咨询或拔打24小时电话：13715327187

详细资料：

此机带以下选件模块:
MG0947C DFB-LD Source(1.31μm,SM)*Custom-made product
MG0902A*2 Modulation Unit     Application accessories
MG0937C LD Source(1.31μm/1.,SM)
MG0928D Edge Emitting LED Source(1.55μm,SM)
MG0928J Edge Emitting LED Source(1.55μm,SM)

现特价出售,有需有的客户请及时联系

MG9001A/9002A 能通过改变光源单位用作不同应用的稳定光源。 尤其是，它们被设计的高输出稳定性为0.02 dB。MG9001A 能掌握两个 LED 光源单位或一个 LD 光源单位。 MG9002A 能掌握 12 个 LED 光源单位或 6 个 LD 光源单位， 是测量多芯光纤缆损耗最理想的仪器。 模拟和数字的调制功能在上述两个型号中也有提供，意即它们可被用作 E/O 转换器。

特牲

• 插入式光源模块
  可以按照用户的应用非常经济地进行配置。
• 综合光功率计量器
  MG9001A 连接到 ML9001A 光功率计， 可以组成一个高性能的光损耗测试装置。
• 可用於多芯光缆的损耗测试
  MG9002A 和 ML9001A 连接， 使得在多芯光缆损耗测试中， 可以同时测量 12 芯光缆的损耗。
• 具有各种调制功能
  模拟和数字的调制功能可使这些型号用作局域网( LAN) 的测量仪表和 E/O 变 换器， 用以测量基频的特徵。 注意如将外部数字的调制和内部的调制单独地运用於 MG9002A， 必须使用 MG0902A 调制单元。
• 多种的光学输出等级
  输出电平可按 0.01 dB 间隔变化至至 6 dB。
• 工作温度范围宽
  (-10℃ 至 50℃ )

技术指标

·主机

Model	MG9001A
Number of units that can be installed	LDlight source:1 pc LED light source:1 to 2pcs
Attenuationdisplay	0 to 6dB,0.01dB steps
Internalmodulation	Frequencies:(270kHz,1kHz,2kHz)±0.1%
	Duty factor:50±10% Output synchronized with modulatinosignal:TTL level (terminated at 10kΩ),BNC
Externalmodulation	Frequency:DC to 30MHz Input level:0 to+0.8/+2 to +5V Impedance:75Ω,BNC connector
GPIB	SH1,AH1,T8,L4,SP0,RL1,PP0,DC1,DT0,C0
Temperature range	-10°to+50℃(spec.meet),-40°to +70℃(storage)
Power	AC100V+(10^-15)%,50/60/400Hz,≤49VA(full units)
Dimensionsand mass	213(W)*88(H)*251(D)mm,≤4kg(without unit)
EMC	EN55011:1991,Group1,ClassA EN50082-1:1992
Safety	EN61010-1:1993(InstallationCategoryII,Pollution DegreeII)

·光源单元

Model		MG0934E	MG0937C	MG0938C	MG0930C	MG0947C	MG0948C
Compatible fiber		GL	SM
Wavelength(μm)		0.85±0.01^*1	1.31±0.02^*2	1.55±0.02^*2	1.31/ 1.55±0.02^*2	1.31±0.01	1.55±0.02
Spectral bandwidth		≤3nm^*2	≤5nm^*2	≤10nm^*2	≤nm^*2( at 1.31μm) ≤10nm^*2 (at 1.55μm)	≤0.1nm
Output	GLfiber	-3±1dBm^*2	-
	SM fiber	-	-3± (+0.5^-1) dBm	-3±1dBm	-4±1dBm	-3±(+0.5^-1)dBm	-3±1dBm
Output	Temper- ature charact- eristics	≤0.2dB^*3	≤0.3dB^*4,≤0.7dB^*5			≤0.3dB^*6,≤0.7dB^*7
	Short term stab ility^*8	≤0.02dB^*9	≤0.05dB^*10			≤0.05dB^*11
Modul-ation	Internaldigital modul-ation	Frequencies:(270Hz,1kHz,2kHz)±0.1%,individualmodulation frequencies for each channel Duty factor:50±10%
	External digital modula-tion	InputRise/fall time:≤3ns(10 to 90%),Level:0 to +0.8/+2 to +5V,Connector:BNC,Impedance:75Ω,Frequency:100Hzto 30MHz Output Rise fall time:≤5ns,Extinction ratio:≥10dB(attenuator:0dB)
	External analog modul- ation-^*12	InputLevel:≤0dB,Connector:BNC Freqency:0.1 to 500MHz Modulationfactor:50 to 100%(input level:0dBm)Input Level≤0dBm,Connector:BNC,Impedance:50Ω Frequency:0.1 to 1000MHz Modulation factor:50 to 100%(input level:0dBm)0 to6dB,0.01dB steps
Attenuation setting range
Temperaturerange		-10° to +50℃(spec.meet),-40°to +70℃(storage)				-10°to+40℃(spec.meet) -10°to +70℃(storage)
dIMENSIONSAND MASS		62(w)*74(h)* 178(d)MM,≤500G	60(W)*74 (H)* 178(D)mm ,≤600g	62(W)*74(H)* 178(D)mm,≤700g		62(W)*74(H) *174(D)mm,≤600g

·Laser product safety protection
·The MG9001A/9002A''''''''''''''''''''''''''''''''s LD light wource units are laser products and safety protection conforming to optical safety standards IEC Pab.825 and 21CFR 1040.10(USA)are incorporated.
·Class-2A or greater power laser products
·LD light source units which are not given here are Class-1 equipment.
·For product ordering informaiton,see pages4-7

Model number	Wavelength	IEC Pab.825		21CFR1040.10
		Max.output	Class	Max.output	Class
Mg0934E	0.85μm	2mW	3A	2mW	3B

·Explanation and warning label example
·Maximum power output and wavelength are given for *1 and *2 respectively.
·LED光源单元

Model		MG 0914E	MG0917A	MG 0917B	MG 0918B	MG 0917D	MG 0918D	MG 0927D /J^*1	MG 0928d /J^*1
Compatible fiber		GL	GI/SM					SM
Wavelength(μm)		0.85±0.015 ^*2	1.3±0.03 ^*2	1.31±0.01	1.55 ± 0.01	1.31 ± 0.01	1.55 ± ≤ 0.01	1.31 ±≤0.01	1.55 ±≤0.01
Spectral bandwidth		≤50nm ^*2	≤130nm ^*2	≤20nm	≤ 25nm	≤ 20nm	≤ 25nm	≤ 20nm	≤ 25nm
Output ^*3	GI fiber	-13±1dBm	-20±1dBm	≥ -50dBm				-
	SM fiber	-	≥-40 dBm	≥-50dBm				≥-28dBm	≥ -32dBm
Output level	Tempe- rature charac- teristics	≤0.2dB^*4				≤ 0.1dB ^*5		≤0.2dB^ *6(FC-PC) ≤0.5dB^ *6(FC)
	Short term stab- ility	≤0.02dB^*7						≤0.02dB^ *7(FC -PC) ≤0.05dB^ *7(FC)
Modul- ation	Internal digital modul- ation	Frequencies:(270Hz,1kHz,2kHz)±0.1%, individual modulation frequencies for each channel Duty factor:50±10%						Input Rise/fall time:
	External digital modu- lation	Input Rise/fall time:≤3ns(10 to 90%), Level:0 to+0.8/2 to +5V, Connector:BNC, Impedance:75Ω,Frequency:DC to 10MHz Output Rise fall time:≤30ns
Atte- nuation setting range	0 to 6dB ,0.01 dBsteps
Connec-tor^*8	FC-type(standard model)							FC-PC type (standard model)
Dimen- sions and mass	31(W)*74(H)*178(D)mm,≤400g						62 (W) *74 (H)* 178 (D) mm, ≤ 500g	62(W)*74(H)* 178(D)mm, ≤500g(MG0927D/ 0928D) ≤600g(MG0927J/ 0928J)

·调制单元

Model	MG0902A
Modulation	Frequency:DC to 30MHz Input:0 to 0.8/+2 to +5V,75Ω,BNC
Temperature range	-10°to +50℃(spec.meet),-40°to +70℃(storage)
Dimensions and mass	62(W)*74(H)*178(D)mm,≤400g


订货信息


Model/Order No.	Name
	Main frame
MG9001A	Stabillized Light Source
MG9002A	Stabillized Light Source
	Standard accessories(MG9001A)
J0017	Power cord,2.5m:1pc
F0013	Fuse,1.25A(T1.25A250V):2pcs
F0040	Fuse,0.2A(MF51NN250V0.2ADC01):1pc
F0043	Fuse,0.315A(MF51NN250V0.315ADC01)3pcs
F0044	Fuse,1A(MF51NN250V1ADC01):1pc
E0007	Fuse,1.6A(MF51NN250V1.6ADC01):2pcs
W0487AE	MG9001A/MG9002A operation manual:1copy
W0487BE	MG9001A/MG9002A service manual:1copy
	Standard accessories(MG9002A)
J0017	Power cord,2.5m:1pc
F0013	Fuse,5A(T5A250V):2pcs
F0040	Fuse,0.315A(MF51NN250V.0315ADC01):2pcs
F0043	Fuse,1A(MF51NN250V1ADC01):2pcs
F0045	Fuse2A(MF51NN250V2ADC01):1pc
F0046	Fuse,3.15A(MF51NN250V3.15ADC01):6pcs
E0007	Optical ortput control key:2pcs
W0487AE	MG9001A/MG9002A operation manual:1copy
W0087BE	MG9001A/MG9002A SERVICE MANUAL:1copy
	Option
MG9001[]A-02	Top cover for stacking
	Plug-in units
MG0914E	LED Source(0.85μm,GI)
MG0917A	LED Source(1.3μm,G1)
MG0917B	LED Source(1.31μm,GI/SM)
MG0917D	LED Source(1.31μm,GI/SM)
MG0918B	LED Source(1.55μm,GI/SM)
MG0918D	LED Source(1.55μm,GI/SM)
MG0927D	Edge Emitting LED Source(1.3μm,SM)
MG0927J	Edge Emitting LED Source(1.31μm,SM)
MG0928D	Edge Emitting LED Source(1.55μm,SM)
MG0928J	Edge Emitting LED Source(1.55μm,SM)
MG0930C	LD Source(1.31/1.55μm,SM)
MG0934E	LD Source(0.85μm,SM)
MG0937C	LD Source(1.31μm/1.,SM)
MG0938C	LD Source(1.55μm,SM)
MG0947C	DFB-LD Source(1.31μm,SM)*Custom-made product
MG0948C	DFB-LD Source(1.55μm,SM)*Custom-made product
MG0902A	Modulation Unit
	Application accessories
B0283	Blank panel
J0200B	FC-FC-2M-GI(FC optical fiber cord,2m,GI)
J0439B	FC-PC-FC·PC-2M-GI(FC·PC optical fiber cord,2m,GI)
J0056B	FC-FC-2M-SM(FC optical fiber cord,2m,SM)
J0635B	FC·PC-FC·PC-2M-SM(FC·PC optical fiber cord,2m,SM)
J0282	Optical fiber cord SGS iriver
Z0173	MG9001A/MG9002A service kit
B0340	MG9001A hard carrying case(without casters)
0341	MG9002A hard carrying case(with casters)

仪器保证：

我们的大多数设备在装运之前均经过严格的质量检测与校验。也可申请国家计量证书。