Anritsu/MP1552B/SDH/PDH/ATM分析仪

• Anritsu/MP1552B/SDH/PDH/ATM分析仪
• 欲购买或租赁Anritsu/MP1552B/SDH/PDH/ATM分析仪？请在线咨询或拔打24小时电话：13715327187

详细资料：

·适用于SDH，PDH和ATM网络建设和维护,
·PDH/SDH全面分析功能,
·jitter和漫游自动测量,
·自动监控1023通道单元和非成形单元 .
技术指标
·MP0121A 2/8/34/139/156M*^1Unit

Bit rate	2.048,8.448,34.368,139.264Mb/s
Level/waveform	Conforms to ITU-T G.703(with 20dB monitoring points)
Connector	BNC,75Ω unbalanced,3-pin Sinemens 120Ω balanced 2.048 Mb/s:HDB3 balanced/unbalanced 8.448,34.368Mb/s:HDB3 unbalanced 139.264Mb/s:CMI unbalanced
Clock	Internal (accuracy:±7ppm),external(ECL[AC] 50Ω,)receive
Frame format	Unframde:2,8,34,139Mb/s Framde:2Mb/s(with/without CRC-4 at channels 30/31,G.704),8Mb/s(G.742),34Mb/s(G.751) ,139Mb/s(G.751)
Test patterns	PRBS:2^11-1,2^20-1,2^23-1(O.151) Word:16 bit program,all 0,all 1
Error addition	Bit(all test pattern)code,E-bit Timing:Single rate (1E3,1E4,1E-5,1E-6,1E-7) FAS:n in 16(n:1 to 4),all
Alarm addition	LOS,LOF,AIS,RDI,RDI(MF) Timing:All
Measurements	Mode:ingle repeat,manual In-service Error:Frame,code,CRC-4 Ebit Alarm:Power fail,LOS,AIS,LOF,MF loss ,RA,RA(MF) Performance:G.821(including ANNEX.D),M.2100,G.826 Out-of -sevice Error:Frame ,code,CRC-4,Ebit,bit Alarm:Power fail,,LOS,AIS,LOF,MF loss ,RA,RA(MF), sync loss
LEDs	LOS,AIS,LOF,MF loss,RA RA(MF)sync loss,errors
Monitor	Frame word
Trouble search	Auto search for errors /alarms in all measured channels
Delay measurment	0 to 1s
Auxillary interface	Clock sync output,frame sync output error output

·MP0122A 1.5/45/52M*^1Unit MP0122B 1.5/45/52/52M*^2(1.31)Unit

Bit rate	1.544,44.736Mb/s
Level/waveform	1.544Mb/s:ANSI T1.102(with 20dB monitoringpoint)0/655ft 447.736 Mb/s:ANSI T1.102(with 20dB monitoring point)0/450/900ft
Conectors	BNC(75Ω unbalancde )Bantam(100Ω balanced) 1.544 Mb/s:AM/B8ZS(balanced)447.736Mb/s:B3ZS(unbalanced)
Clock	Internal (accuracy:±7ppm),external(ECL[AC]50Ω,)receive
Frame format	Unframed:1.5,45Mb/s Framed :1.5Mb/s(D4,ESF,Japan ESF*^3 ),45Mb/s(M13, C-bit),MUX/DEMUX(Option 07)
Test patterns	PRBS:2^11-1,2^15-1,2^20-1(zero suppress),2^20-1,2^23-1(O.151) Word:16-bit program,all 0,1,3, in 24(1.5Mb/s)
Error addition	Bit(all,test pattern)code parity CRC-6,C-bit,REI Timing:Single rate ((1E3,1E4,1E-5,1E-6,1E-7) FAS:n in 16(n:1 to 4),all
X-bit setting	00,01,10,11
Alarm addition	LOS,LOE,AIS,RDI Timing:All
Measurements	Mode :Single repeat manual In-service Errors:FAS,code parity CRC-6,C-bit REI Alarms:Power-faii,LOS AIS LOF RDI Error performance:G.821(inc.Annex D),M.2100,G.826 Out-of-service Errors:FAS,code parity CRC-6,C-bit REI bit Alarms:Power-faii,LOS AIS LOF RDI sync loss Error performance:G.821(inc.Annex D),M.2100,G.826
LEDs	LOS,LOF,AIS,RKI,sync olss errors
Trouble search	Auto search for errors/alarms in all measuredchannels
Delay measurement	0 to 1 s
Auxiliary interface	Clock sync ouput frame sync output erroroutput

·52/156/622/2488M

Bit rate	50.840,155.520,622.080,2488.320Mb/s
Level/waveform	52M(electrical:B3ZS)*^1:ANSI T1.102,0/450ft 52M(optical):As per MP0122B optiical interface specifications 156M(electrical:CMI)*^2:ITU-T G.703 156M(optical):As per interface unit specifications 622M(electrical ,optical):As per interface unit specifications 2488M(electrical ,optical):As per 2.5G unit specifications
Clock	Internal (accuracy:±3.5ppm jitter unit notinstalled)lock(2/1.5M,64k*^3),external(ECL[AC] 50Ω,)received signal
Mapping	See Figs.1 to 3
Through	Loop through (bit error insertion possible)
Test patterns	PRBS:2^11-1,2^15-1,2^20-1(zero suppress,MP0122A/Binstalled)),2^20-1,2^23-1(O.151) Word:16-bit program,all 0,all 1
Error addition	Bit (all test pattern),FAS,B1,B2,B3,BIP-2,MS-REI,HP-REILP-REI Timing:Single rate(1E3,1E4,1E-5,1E-6,1E-7) FAS:Alternative (normal frame:1 to 15,error frame:0 to 15,error frame:0to 15)
Alarm addition	LOS,LOF,MS-AIS,MS-RDI,AU-LOP,HP-RDI,TU-AIS,TU-LOM,LP-RDI,LP-RFI Timing:All
Measurements	Mode:Single repeat manual In-service Errors:B1,B2,B3,BIP-2 MS-REI,HP-REI,LP-REI Alarms:Power-fail LOS LOF OOF MS-AIS MS-RDI AU-AIS AU-LOP HP -RDI TU-AISTU-LOP TU-LOM LP-RDI LP-FRI Error performance:G.826,M.2101 Out-of-service rrors:B1,B2,B3,BIP-2 MS-REI,HP-REI,LP-REI,bit Alarms:Power-fail LOS LOF OOF MS-AIS MS-RDI AU-AIS AU-LOP HP -RDI TU-AISTU-LOP TU-LOM LP-RDI LP-FRI sync loss Error performance:G.826,M.2101
LEDs	LOS LOF OOF MS-AIS MS-RDI AU-AIS AU-LOPHP-RDI TU-AIS TU-AIS TU-LOP TU-LOM LP-RDI LP-RFI sync loss error
Justification	AU ponter, C,C1/C2 Measurement:NDF,+PJC,-PJC,-PJC,3 times consecutive
Monitor	SOH POH K1/K2 pointer path trace (TIM alarmsdetectable)
Pointer sequence	Signal of lpposite polariyt regualr withdouble regular with missing double of opposite polarity 87-3/26-1(normal,add cance)continuous pattern (normal add cancel)
SOH 64-frame	K1/K2 any 1 byte
Trouble search	Auto search for errors /alarms in all measuredchannels
Delay measurement	0 to 1 s
Auxiliary interface	Clock sync output frame sync output DCCinterface(V.11)

·General

Printer	Internal external
Internal memory	Measurement settings memory:10, graphicsmemory:15
Others	FDD RS-232C (Option 01) ,GPIB(Option 02),Ethernet(Option03)*^1,video output(Option 15)*^2 buzzer ,clock
EMC	EN55011:1991,gROUP 1,Class A EN50082-1:1992 Harmonic current emissions:EN61000-3-2(1995)
Saftety	EN61010-1:1993(Intallation Categroty Ⅱ,PollutionDegree Ⅱ)
Dimensions and mass	320(W)*177(H)*350(D)mm ,10kg approx.(excludingplug-in units and options)
Power	100 to 240Vac 47.5 to 63Hz ,≤300VA
Temperature	0 °to +40℃

·MP0124A/0125A/0126A Jitter Unit

Bit rate	MP0124A:2.048,8.448,34.368,139.264, 155.520,622.080Mb/s MP0125A:1.544,44.736,51.840,155.520622.080Mb/s MP0126A:1.544,2.048,8.448,34.368,44.736,139.264 155.520,622.080Mb/s
	Bit rate (Mb/s)		F1 (Hz)	F1$$$ (Hz)	F2* (KHz)	F2*$$$ (KHz)	F3* (kHz)	F4* (KHz)	F5* (kHz)	F6* (KHz)
	1.544		0.1	-	0.5	-	10	12.5	50	-
	2.048		0.1	-	1	-	20	27.5	110	-
	8.448		0.1	-	2	-	20	105	420	-
	34.368		0.1	-	5	-	100	250	1000	-
	44.736		0.1	-	5	-	100	250	1000	-
	139.264		0.1	-	5	-	100	1000	4000	-
Jitter gener ation	51.840		0.1	-	2	-	80	50	-	500
	155.520		0.1	1000	6.5	25	500	150	-	1500
	622.080		0.1	500	25	50	500	600	-	6000
	Accuracy:±5%±0.05UIp-p at Fr(2UI range),±5%±0.3UIp-pat Fr(20 UI range),±5%±0.8 UIp-p at Fr(50UI range) ±5%±3.2(UIp-p at Fr(200UI range) *Fr.100kHz(156M/622M,2UI range)500Hz (1.5M,20UI range)1kHz(others)
Jitter toler ance measur ement	Conforms to ITU-T G.823/G.824/G.825/G.958 Display:Numeric ,graphic
Freq uency offset	Range:±999.9 ppm/step(0.1ppm Jitter:off)±70ppm/step(0.1 ppm,Jitter:on/off) Accury:±0.1ppm (after power-on caliberates after 60min warm-up ,23°to 5℃
Auxi llary inter face	Extrnal modualtion input external 10MHzreference inputreference colck output
Jitter measu rement	Modulation frequency:2Hz to5MHz Amplitued:0 to 20.00UIp-p,0 to 7.07UIrms(Option 01) Resolution:0.001UIp-p/0.001UIrms(2UI range)0.01UIp-p/0.01UIrms(20UI range)
	Bit rate (Mb/s)		A1 (UI p-p)	F1 (Hz)	F1$$$ (Hz)	F2 (kHz)	F3 (kHz)	F4 (kHz)	F5 (kHz)
	1.544		0.5	2	20	0.2	2.5	10	40/(15) *^2
	2.048		0.5	2	20	0.45	6	25	100/(18) *^2
	8.448		0.5	2	20	0.2	10	100	400/(70) *^2
	34.368		0.5	2	20	0.5	40	500	800/(300) *^2
	44.736		0.5	2	20	3	40	200	400
	139.264		0.5	2	20	0.25	50	1000	3500/(1200) *^2
	51.840		0.5	2	20	0.2	5	100	400
	155.520		0.5	2	20	0.7	20	500	1300
	622.080		0.5	2	20	20	200	2000	5000
	Accuracy [UIp-p]:±W UIp-p(Fr Hz) 156Mb/s(optical):When input level-25dB max.add 0.01UIp-p/dB to above specifications. 622Mb/s(optical):When input level-20dB max.add 0.01UIp-p/dB to above specifications. [UIrms]: ±Y UIp-p(Fr Hz) 156Mb/s(optical):When input level-25dB max.add 0.002UIrms/dB to above specifications. 622Mb/s(optical):When input level-20dB max.add 0.002UIrms/dB to above specifications. Frequency response(Fr Hz) ±5%(2 to 20Hz ),±2% (20Hz to 300kHz),±3%(300kHz to 1MHz),±5%(1 to 3MHz),±10%(3to 5MHz)
	Bit rate (Mb/s)		W(UIp-p)*^1				W(UIp-p)*^2
			2UI		20UI		2UI		20UI
	1.544 (CLK)		0.015		0.20		0.005		0.03
	1.544 (AMI /BEZS)		0.040		0.22		0.006		0.04
	2.048 (CLK)		0.015		0.20		0.005		0.03
	2.048 (HDB3)		0.040		0.22		0.006		0.04
	8.448 (CLK)		0.015		0.20		0.005		0.03
	8.448 (HDB3)		0.040		0.22		0.006		0.04
	34.368 (CLK)		0.015		0.20		0.005		0.03
	34.368 (HDB3)		0.040		0.22		0.017		0.04
	44.736 (CLK)		0.015		0.20		0.005		0.03
	44.736 (B3ZS)		0.040		0.22		0.006		0.04
	139.264 (CLK)		0.030		0.20		0.005		0.03
	139.264 (CMI)		0.040		0.30		0.022		0.06
	51.840 (CLK)		0.015		0.20		0.005		0.03
	51.840 (B3ZS)		0.040		0.22		0.017		0.05
	51.840 (optical) *^3		0.070		0.30		0.022		0.06
	155.52 (CLK)		0.035		0.20		0.017		0.05
	155.52 (CMI)		0.070		0.30		0.022		0.06
	155.52 (optical) *^3		0.070		0.30		0.022		0.06
	622.08 (CLK)		0.050		0.20		0.027		0.07
	622.08 (optical) *^3		0.100		0.30		0.032		0.08
	Filter
	Bit rate (Mb/s)		HP0 (Hz)	HP1 (Hz)	HP2 (kHz)	HP2$$$ (kHz)	HP(kHz)		LP(kHz)
	1.544		10	10	8	-	12		40
	2.048		10	20	18	0.7	12		100
	8.448		10	20	3	80	12		400
	34.368		10	100	10	-	12		800
	44.736		10	10	30	-	12		400
	139.264		10	200	10	-	12		3500
	51.840		10	100	20	-	12		400
	155.520		10	500	65	-	12		1300
	622.080		10	1000	250	-	12		5000
Hit measu rement	Count seconds,% free seconds
Jitter tran sfer measu rement	Cnforms to ITU-T G.823/G.824/G.958[selectivebandwidth:≤10Hz(modulation frequency:≥20Hz] Display :Numeric,graphic
Frequ ency measu rement	Resolution:0.1ppm Display :Hz or ppm(afterpower-on caliberates after 60 min warm-up,23°to 5℃)
Aux-i lary inte rface	Demodulation output,referenceclock input
Wande- rgerner ation	Modulation frequency:10μHz to 0.2Hz (sinewave)
	Bit rate (Mb/s)	Amplitude			Frequency
		A0 (UIp-p)	A1 (UI p-p)	A2(UI p-p)	f0 (μHz)	f1( μHz)	f2 (mHz)	f3 (mHz)	f4( mHz)	f5 (mHz)
	1.544	40	-	20	10	-	-	65	130	200
	2.048	40	-	20	10	-	-	65	130	200
	8.448	200	-	20	10	-	-	13	130	200
	34.368	1000	113	20	10	180	1.6	23	130	200
	44.736	1200	135	20	10	180	1.6	19	130	200
	139.264	3000	338	20	10	180	1.6	19	130	200
	51.840	1200	135	20	10	180	1.6	19	130	200
	155.520	3600	406	20	10	180	1.6	16	130	200
	622.080	14400	1620	20	10	180	1.6	16	130	200
Wande- rmeasur ement (Option 02)	Reference input:1.544M(AM/B8ZS,clock)2.048M(HDB3,clock) Measurment rage p-p :0.0 to 3.2E5 ns,+p/-p:0.0 to 1.6E5 ns ,TIE:±0.0 to 1.6E5 ns MTIE*:0.0 to 1E6 ns ,TDEV*:0.0 to 1E6 ns *:MTIE,TDEV measurement requier external PC and MX150001A Wander(MTIE TDEV),ApplicationSoftware Resolution :0.1ns Sampling interval:25ms Filter:DC to 0.01 Hz ,DC to 10Hz ,0.01Hz to 10Hz Display:Numberic,graphic

·MP0130A 2.5G Jitter Unit

Jitter gener- ation	Frequency :2488.32MHz Modulation frequency:0.1 Hz to 20MHz Amplitude:0 to 808.0UIp-p
	Bit rate	F1 (Hz)	F1$$$ (Hz)	F2 (Hz)	F2$$$ (Hz)	F3 (kHz)	F4 (kHz)	F4 (kHz)
	2488.32 Mb/s	0.1	15	600	25	500	2,000	20,000
Jitter toler- ance measur- ement	ITU-T G.825,G.958A,G.958B,user Bellcore253
Frequ- ency offset	±70ppm /step (0.1 ppm jitter :on / off
Auxi- lary inte- rface	External colck input reference clolck ouput
Jitter measu- rement	Frequency :2488.32MHz±50ppm
	Bit rate		F0 (Hz)	F0$$$ (Hz)	F2 (kHz)		F2$$$ (kHz)	F3 (kHz)	F4 (kHz)
	2488.32 Mb/s	2UI	-	100	-		100	1,000	20,000
		32UI	10	-	6.25		-	1,000	20,000
Jitter tran- sfer measu- rement	ITU-T G.958A,G.958B user Bellcore 253 [selectablebandwith :≤10Hz(modualtion frequency:≥20Hz)
Freq- uency meas- urent	2488.32 MHz±100ppm(resolution:0.1ppm)
Hit measu- rement	Count,seconds,% free seconds
Auxi- lary inte- rface	Reference clock input
Wander gener- ator	Frequency :2488.32MHz Modualtion frequency:10μHz to 200mHz(sine wave)
	Bit rate	Amplitude (UIp-p)			Frequency (mHz)
		A0	A1	A2	f0	f1	f2	f3	f4	f5
	2488M	57,600	6,480	800	0.01	0.18	1.6	16	130	200
Wander measu- rement	Frequency: 2488.32 MHz ±50ppm (Wander measurement becomes effective when MP0124A/0125A/0126Aplus Option 02 is mounted Measurement frequency:Up to 10 Hz Measurement rage p-p:0.0 to 3.2E5 ns,+p/-p:0.0 to 1.6E5 ns, MTIE/TKEV:0.0 to 1.0E6 ns Auto-measurement:TIE,MTIE,TDEV(MTIE,TDEV:necessary for MX150001A applicationsoftware)

·MP0123A ATM Unit

Bit rate	1.544,2.048,34.368,44.736,139.364,51.840,155.520,622.080Mb/s
Traffic pattern	CBR,burst ,sawtooth PCR with CBR,Poisson
Test patterns	Cell:Single cell PRBS9 cross cell PRBS 9/15/23,16-bitword patern edit pattern time stamp O.191:Edit pattern AAL1:Single cell PRBS 9 ,cross cell PRBS 9/15/23,16-bit word pattern editpattern time stamp AAL2(CPS-PDU):Time stamp AA2(CPS-PACKET):Single cell PRBS 7,8-bit word pattern ,edit pattern AAL3/4(SAR-PDU):Time stamp AAL3/4(CPCS-PDU):Single cell PRBS 9 ,cross cell PRBS 9/15/23,165-bit wordpatttern edit pattern AAL5:Single cell PRBS 9,cross cell PRBS 9/15/23 ,16-bit word pattern editpattern
Error additon	Cell:HEC,programmable pattern O.191:Lost cell misinserted cell errored cell SECB AAL1:Lost cell SNP PRBS word AAL2(CPS-PDU):P,SN,OSF AAL2(CPS-PACKET):HEC,PRBS word AAL3/4(SAR-PDU):SN,CRC10,segment type,LI abort AAL3/4(CPCS-PDU):CPI,B/E tag mismatch,BA size AL length PRBS word AAL5:Frame size length CRC32 ,abort PRBS word
Alarm additon	LCD,VP.VC AIS VP/VC RDI,VP/VC CC,CP/VC ollpback cell
PM cell	Error insertion:Lost cell misinserted cell BIPV SECB
Cell editin	O.191,AAL1,AAL2,AAL3/4,AAL5,AISMRKI,CC,loopback,FM,BRbackground(10ch)
Memorized cell	Possible to send after edition receiver$$$s capture data
Measurement	Error Cell:Cell cout correctable HEC uncorrectabel HEC non-conforming cell O.191:Errored cell lost cell misinserted cell SECB AAL1:SAR-PDU count lost cell SNP uncorrectable SNP PRBS word AAL2:CPS-PDU count P, OSF SN CPS packet cout HEC PRBS word AAL3/4*:SAR-PDU count CRC10 MID cout(SAR-PDU with selected MID value),SN,ST(SEGMENT TYPE),LI abort discarded PDU(one of SN error LI error abort COM with ST error or EOM with ST error),CPCS-PDUcount CPI,B/E tag mismatch BA aize AL length undelverded PDU(one of CPI eror B/E tag mismatchBA size error ,AL error or length error )PRBS,word *CRC10 is calcuated for all SAR-PDU,The others are calculated for SAR-PDUwith specified MID AAL5:CPCS-PDU count frame size length CRC32 abort discarede PDU(one of framesize error length error CRC32 error or abort)PRBS,word FM:Lost cell misinserted cell BIPV SECB BR:Lost cell misinserted cell BIPV,SECB Alarm :LCD,VP/VC segment AIS,VP/VC end-to -end AIS ,VP/VC segment RDI VP/VCend-to-end RDI,VP/VC segmnet LOC VP/VC end -to -end LOC
LED	LCK VP-AIS VP-RID,VP-LOC,VC-AIS,VC-RDI,VC-LOC,error
Monitor	Live moniter(1023 channel monitor )traffic monitor cellmonitor
Delay measurement	1-point CDV,2-point CDV
Capture	1 to 2016 cells

·MP0131A Add /Drop Unit

Bit rate	1.544,2.048,34.368,44.736,139.264Mb/s
Level/waveform	1.544 Mb/s :ANSI T1.102,0/655ft 44.736Mb/s:ANSI T1:.102,0/450/900ft(0 ft:Drop only) 2.048/34.368/139 Mb/s:ITU-T G.703
Connector	BANTAM(100Ω,balaned)1.544Mb/s (AMI/B8ZS) 3-pin Siement (120Ωbalanced):2.048Mb/s(HDB3) BNC(75Ω,unbalanced):2.048Mb/s 34.368Mb/s(HDB3),139.264Mb/s(CM)
Mapping	Fig-4

仪器保证：

我们的大多数设备在装运之前均经过严格的质量检测与校验。也可申请国家计量证书。