Tektronix/CFG280/0.1Hz-11MHz 函数信号发生器

• Tektronix/CFG280/0.1Hz-11MHz 函数信号发生器
• 欲购买或租赁Tektronix/CFG280/0.1Hz-11MHz 函数信号发生器？请在线咨询或拔打24小时电话：13715327187

详细资料：

CFG280

• 0.1 Hz to 11 MHz (Calibrated)
  
• 0.01 Hz to 11 MHz (Uncalibrated)
  
• 1 Hz to 100 MHz Counter
  
• Square, Triangle and Sine Waves; TTL Output
  
• 20 dB Attenuator
  
• External Gate Input
  
• VCF (FM) Input
  
• AM 0 to 100% Input for External Sine Wave
  
• Internal or External Frequency Sweep
  
• One Year Warranty

CFG280 11 MHz Function Generator with Counter

The CFG280 combines an 11 MHz function generator with a 1 Hz to 100 MHz frequency counter. The on-board counter allows the operator to set the frequency output of the function generator precisely. This versatile instrument conserves both bench space and budget.

	CFG253	CFG280
Waveform outputs	Square wave, sine wave, triangle wave, TTL pulse, sweep functions for all outputs	Square wave, sine wave, triangle wave, TTL pulse, sweep functions for all outputs
Ranges	1.0 Hz to 3.0 MHz in 7 ranges	0.1 Hz (calibrated) to 11 MHz in 8 ranges
Frequency multiplier	Variable from 0.3 to 3.0 times the selected frequency range	Variable from 0.1 to 1 (uncalibrated) 1 to 11 (calibrated)
Dial accuracy	±5% of full scale	±5% of full scale from 0.1 Hz to 10 MHz
Sine wave distortion	<1% (10 Hz to 100 kHz)	<1% (10 Hz to 100 kHz), -30 dB at all other frequencies
Triangle wave linearity	20 Hz to 200 kHz: ≥99%; 200 kHz to 3 MHz: ≥97%	0.1 Hz to 110 kHz: ≥99%; 110 kHz to 1 MHz: ≥97%; 1 MHz to 11 MHz: ≥95%
Square wave response	≤100 ns rise/fall time, maximum output into 50 Ω load	≤25 ns rise/fall time, maximum output into 50 Ω load
Main output amplitude	0 to 20 Vp-p	0 to 20 Vp-p
Attenuator	20 dB	20 dB
SYNC/TTL output	TTL output level, rise <25 ns (20 TTL load) ≥3 V pk	<25 ns rise/fall time, maximum output into 50 Ω load
Main output impedance	50 Ω ±10%	50 Ω ±10%
DC offset (continuously variable)	±10 V minimum open circuit; ±5 V minimum into 50 Ω load	±10 V minimum open circuit; ±5 V minimum into 50 Ω load
Symmetry/duty cycle	5 to 1 minimum symmetry change	95/5 fixed (pulse and ramp)
Internal variable sweep rate	0.5 Hz to 50 Hz	0.5 Hz to 50 Hz
External voltage-controlled variable sweep range (10 kΩ Input)	100:1 minimum for 0 to +10 VDC input with frequency control set at maximum	100:1 minimum for 0 to ±10 VDC input with frequency control set at 0.1 or 11
VCF (FM) Input		±10 V input shifts frequency ≥100:1 up or down with dial set at 0.1 or 11 respectively
AM		0 to 100%, DBSC, external sine wave only
Warranty	One year	One year
Safety	EN61010-1, UL1244, CSA231	EN61010-1, UL1244, CSA231
EMC	Meets 89/336/EEC	Meets 89/336/EEC
CFG280 Counter Specifications
Frequency range (AC coupled)		1 Hz to 100 MHz
Sensitivity		30 mVRMS from 1 Hz to 50 MHz; 50 mVRMS from 50 MHz to 100 MHz
Period range/resolution		1 ms to 60 s/1 ms
Crystal frequency		10 MHz
Time base stability		±0.001% (±10 ppm) from 0 ° to 40 °C
Frequency accuracy		±(time base error + 1 count)
Period accuracy		±(time base error + 1 count + trigger error)

仪器保证：

我们的大多数设备在装运之前均经过严格的质量检测与校验。也可申请国家计量证书。